{"title":"Adafruit Products","description":"\u003cp\u003eBrowse our Adafruit Products collection. Best Price.\u003c\/p\u003e","products":[{"product_id":"adjustable-laser-mounting-stand","title":"Adjustable Laser Mounting Stand","description":"\u003cp\u003e\u003cstrong\u003eThe Adjustable Laser Mount provides a simple way to securely position compatible laser diode modules, with adjustable tilt and a slotted mounting plate for easy installation on robots, workbenches, and custom projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eUse this nice adjustable laser mount to attach any of our \u003cstrong\u003elaser diode modules\u003c\/strong\u003e to your desk, robot, shark, etc. A set-screw holds the laser in place. You can then \u003cstrong\u003eadjust the tilt\u003c\/strong\u003e. Has a flat mounting plate with two slots for easy attachment and adjustment.\u003c\/p\u003e\n\u003cp\u003eWe also sell the fixed stand here: Fixed Laser Mounting Stand.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note that the laser is not included.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable laser mount for laser diode modules\u003c\/li\u003e\n\u003cli\u003eSet-screw secures laser in place\u003c\/li\u003e\n\u003cli\u003eTilt adjustment capability\u003c\/li\u003e\n\u003cli\u003eFlat mounting plate with two slots\u003c\/li\u003e\n\u003cli\u003eEasy attachment and adjustment\u003c\/li\u003e\n\u003cli\u003eLaser module not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 61.1g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adjustable Laser Mounting Stand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930704932953,"sku":"dwy1789671594625","price":7.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adjustable-laser-mounting-stand_1.jpg?v=1789671598"},{"product_id":"standard-size-high-torque-metal-gear-servo","title":"Standard Size - High Torque - Metal Gear Servo","description":"\u003cp\u003e\u003cstrong\u003eThe High-Torque Metal Gear Servo delivers up to 10kg·cm of torque with durable metal gears, making it ideal for robotics, automation, and motion-control projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eThis \u003cstrong\u003ehigh-torque standard servo\u003c\/strong\u003e now comes in a metal-gear flavour, for extra-high torque (\u003cstrong\u003e10 kg*cm!\u003c\/strong\u003e) and reliability!\u003c\/p\u003e\n\u003cp\u003eIt can rotate at least \u003cstrong\u003e120 degrees\u003c\/strong\u003e (60 in each direction) with a classic \u003cstrong\u003e1.5-2.5ms pulse\u003c\/strong\u003e, but if you can extend your pulses it can go up to about \u003cstrong\u003e170 degrees\u003c\/strong\u003e - it varies a bit servo-to-servo. You can use any servo code, hardware, or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback \u0026amp; gearbox. Comes with a bunch of plastic horns, as shown. \u003c\/p\u003e\n\u003cp\u003eTo control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position \"0\" (1.5ms pulse) is middle, \"90\" (~2ms pulse) is all the way to the right, \"-90\" (~1ms pulse) is all the way to the left.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e that the default servo pulse widths (\u003cstrong\u003eusually 1ms to 2ms\u003c\/strong\u003e) may not give you a full 180 degrees of motion. In that case, check if you can set your servo controller to custom pulse lengths and try 0.75ms to 2.25ms. You can try shorter\/longer pulses but be aware that if you go too far you could break your servo!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-torque metal-gear construction with 10 kg*cm torque output\u003c\/li\u003e\n\u003cli\u003eRotation range of 120 degrees standard (60 degrees each direction), up to 170 degrees with extended pulses\u003c\/li\u003e\n\u003cli\u003eCompatible with standard 1.5-2.5ms servo pulse control\u003c\/li\u003e\n\u003cli\u003eWorks with any servo code, hardware, or library\u003c\/li\u003e\n\u003cli\u003eArduino compatible – connect to pin 9 or 10 and use Arduino Servo library\u003c\/li\u003e\n\u003cli\u003eIncludes multiple plastic horns\u003c\/li\u003e\n\u003cli\u003eSupports custom pulse widths from 0.75ms to 2.25ms for extended range\u003c\/li\u003e\n\u003cli\u003eIdeal for beginners – no motor controller or feedback system required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 4.8V - 6V DC max (5V works well)\u003c\/li\u003e\n\u003cli\u003eAverage Speed: 60 degrees in 0.20 sec (@ 4.8V), 60 degrees in 0.16 sec (@ 6.0V)\u003c\/li\u003e\n\u003cli\u003eWeight: 62.41g\u003c\/li\u003e\n\u003cli\u003eTorque: At 4.8V: 8.5 kg-cm \/ 120 oz-in, and at 6V: 10 kg-cm \/ 140 oz-in.\u003c\/li\u003e\n\u003cli\u003eSize mm: (L x W x H) 40.7 x 19.7 x 42.9\u003c\/li\u003e\n\u003cli\u003eSpline Count: 25\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLearn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Standard Size - High Torque - Metal Gear Servo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930729377881,"sku":"fxy1789671700957","price":17.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/standard-size---high-torque---metal-gear-servo_1.jpg?v=1789671705"},{"product_id":"fixed-laser-mounting-stand","title":"Fixed Laser Mounting Stand","description":"\u003cp\u003e\u003cstrong\u003eThe Fixed Laser Mount provides a secure way to install compatible laser diode modules, featuring a set-screw clamp and four-hole mounting plate for easy attachment to robots, workbenches, and custom projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eUse this nice fixed laser mount to attach any of our \u003cstrong\u003elaser diode modules\u003c\/strong\u003e to your desk, robot, shark, etc. A set-screw holds the laser in place. Has a \u003cstrong\u003eflat mounting plate\u003c\/strong\u003e with four holes for easy attachment and adjustment. Fits all of our modules.\u003c\/p\u003e\n\u003cp\u003eWe also sell the adjustable version here: Adjustable Laser Mounting Stand\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note that the laser is not included.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFixed laser mount for securing laser diode modules\u003c\/li\u003e\n\u003cli\u003eSet-screw fastening system\u003c\/li\u003e\n\u003cli\u003eFlat mounting plate with four attachment holes\u003c\/li\u003e\n\u003cli\u003eEasy adjustment capability\u003c\/li\u003e\n\u003cli\u003eUniversal compatibility with all standard modules\u003c\/li\u003e\n\u003cli\u003eLaser module not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 35mm x 30mm x 18mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 3.2mm\u003c\/li\u003e\n\u003cli\u003eMounting hole pitch (centre-to-centre): 15mm x 23.5mm\u003c\/li\u003e\n\u003cli\u003eFits lasers up to 12.6mm diameter\u003c\/li\u003e\n\u003cli\u003eWeight: 20.3 grams\u003c\/li\u003e\n\u003cli\u003eM3 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Fixed Laser Mounting Stand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLaser is not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930731868249,"sku":"fxj1789671709857","price":4.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/fixed-laser-mounting-stand_1.jpg?v=1789671713"},{"product_id":"10-pin-idc-socket-rainbow-breakout-cable","title":"10-pin IDC Socket Rainbow Breakout Cable","description":"\u003cp\u003e\u003cstrong\u003eThe 10-Pin IDC to Female Socket Cable provides a convenient way to break out IDC connections to standard 0.1\" sockets, making it ideal for prototyping, debugging, and custom wiring projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eWe’re not entirely sure what to call this cable. It features a \u003cstrong\u003e10-pin IDC connector\u003c\/strong\u003e on one end, \u003cstrong\u003e6 inches\u003c\/strong\u003e of rainbow ribbon cable, and \u003cstrong\u003e0.1\" female socket\u003c\/strong\u003e connectors on the other end.\u003c\/p\u003e\n\u003cp\u003eWe think it could be useful as a \u003cstrong\u003e10-pin JTAG breakout adapter\u003c\/strong\u003e, or perhaps as a cable re-arranger for custom wiring projects. Either way, it seems handy, so we picked up a bunch.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/XNyl7mZ3V1g?si=aunjqS_hoBEMmqbT\u0026amp;start=7\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e10-pin IDC connector on one end\u003c\/li\u003e\n\u003cli\u003e6 inches of rainbow ribbon cable\u003c\/li\u003e\n\u003cli\u003e0.1\" female socket connectors on both ends\u003c\/li\u003e\n\u003cli\u003eSuitable for JTAG debugging and programming\u003c\/li\u003e\n\u003cli\u003eIdeal for breadboard prototyping\u003c\/li\u003e\n\u003cli\u003ePin re-arrangement and breakout applications\u003c\/li\u003e\n\u003cli\u003eStandard 0.1\" pitch connectors\u003c\/li\u003e\n\u003cli\u003eColour-coded ribbon for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 10-pin IDC Socket Rainbow Breakout Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930758508633,"sku":"qby1789671950286","price":4.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/10-pin-idc-socket-rainbow-breakout-cable_1.jpg?v=1789671956"},{"product_id":"right-angle-usb-cable-amicrob","title":"Right Angle USB cable - A\/MicroB","description":"\u003cp\u003e\u003cstrong\u003eThis Right-Angle USB-A to Micro-B Cable saves space with a 90° connector, making it ideal for compact setups like Raspberry Pi Model A or B, while its thicker power wires support higher current devices.\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eThis here is your standard \u003cstrong\u003eA to micro-B USB cable\u003c\/strong\u003e, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a \u003cstrong\u003eright angle bend\u003c\/strong\u003e. We thought this might make a good pair for a Raspberry Pi Model A or B as the cable doesn't stick out as far. We got cables with extra-beefy \u003cstrong\u003e24 AWG\u003c\/strong\u003e \u003cstrong\u003epower wires\u003c\/strong\u003e, and \u003cstrong\u003e28 AWG data lines\u003c\/strong\u003e, so it's particularly good for power-hungry devices like micro-computers and phones.\u003c\/p\u003e\n\u003cp\u003eThis cable isn't suggested for Model B+ since the micro USB moved around the corner - this cable blocks the HDMI port!\u003c\/p\u003e\n\u003cp\u003eApproximately 5 feet \/ 1.5 meter long.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB A to Micro-B connector with right angle bend design\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 and 2.0 compatible\u003c\/li\u003e\n\u003cli\u003e24 AWG power wires for high-current devices\u003c\/li\u003e\n\u003cli\u003e28 AWG data lines\u003c\/li\u003e\n\u003cli\u003e5 feet (1.5 meters) long\u003c\/li\u003e\n\u003cli\u003eIdeal for Raspberry Pi Model A and B\u003c\/li\u003e\n\u003cli\u003eNot compatible with Raspberry Pi Model B+ (blocks HDMI port)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 1.42m\u003c\/li\u003e\n\u003cli\u003eWeight: 56.13g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Right Angle USB cable - A\/MicroB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930758967385,"sku":"cpb1789671976695","price":4.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/right-angle-usb-cable---amicrob_1.jpg?v=1789671981"},{"product_id":"vs1053-codec-microsd-breakout-mp3wavmidiogg-play-record-v4","title":"VS1053 Codec + MicroSD Breakout - MP3\/WAV\/MIDI\/OGG Play + Record (v4)","description":"\u003cp\u003eThis breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally. There is also 8 GPIO pins that can be used for stuff like lighting up small LEDs or reading buttons.\u003c\/p\u003e\n\u003cp\u003eAll this functionality is implemented in a lightweight SPI interface so nearly any microcontroller can play audio from an SD card. There's also a special MIDI mode that you can boot the chip into that will read 'classic' 31250Kbaud MIDI data on a UART pin and act like a synth\/drum machine - there are dozens of built-in drum and sample effects! But the chip is a pain to solder and needs a lot of extras. That's why we spun up the best breakout, perfect for use with an Arduino but also good for other microcontrollers that just don't have the computational power to decode MP3s.\u003c\/p\u003e\n\u003cp\u003eThe breakout is slim enough to fit on a breadboard with 1 row of holes left over for wiring. There are 3.3v and 1.8v regulators onboard with ferrite beads and analogue filtering for quality analogue output. There's a microphone input port that you can wire up a line-in or mic to and record compressed audio. All 8 GPIO are broken out and they all have built-in 100K pulldowns, simply connect your button from the GPIO pin to 3.3V for an active-high connection. You'll likely want to play music from a microSD card so we added a holder on-board. And since we know so many of our customers use 5V microcontrollers like the Arduino, we made the interface pins all 5V compliant with level shifters so you can use the chip at 3V or 5V power\/logic!\u003c\/p\u003e\n\u003cp\u003eEach order comes with a fully assembled and tested breakout board, some 0.1\" male header you can solder to the breakout so it plugs into a breadboard and a bonus stereo headphone jack that will be handy when you want to plug headphones in!\u003c\/p\u003e\n\u003cp\u003eIf you have an older v1.0 which does not have the two big round silver capacitors on board, you can drive a pair of 30ohm headphones directly from the LOUT\/ROUT pins if the 'ground' connection is tied to GBUF however this is not a line-out connection. If you want to connect to a stereo system or powered speakers with a v1.0 board, fit the two included 100uF electrolytic caps in series on the LOUT\/ROUT pins between the breakout and the input of the stereo, then connect the common ground to AGND\u003c\/p\u003e\n\u003cp\u003eIf you just need loudspeakers, our 3.7W stereo amp board plus two 3W 4ohm speakers will give you lots of boom and you don't need any extra blocking caps because the amplifier has differential inputs.\u003c\/p\u003e\n\u003cp\u003eCheck out our detailed tutorial \u0026amp; excellent Arduino library that demonstrates everything cool about this library: playing music off an SD card, using the GPIO pins as input\/outputs, playing music using an interrupt (so it's in the background), using the VS1053 as a MIDI synthesizer (no SD required), and recording Ogg Vorbis audio from a microphone\/line-in to SD.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of July 29th, 2024\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- we've updated this PCB with \u003cstrong\u003eAdafruit Pinguin\u003c\/strong\u003e to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 27.72mm x 58.08mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930760835161,"sku":"mdh1789672052741","price":23.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/vs1053-codec-microsd-breakout---mp3wavmidiogg-play-record-v4_1.jpg?v=1789672056"},{"product_id":"acrylic-stand-for-16-x-2-character-lcd","title":"Acrylic Stand for 16 x 2 Character LCD","description":"\u003cp\u003eHere is a mini-kit to get your 16 x 2 LCD standing up straight on your table. Made of 3mm black acrylic pieces, with 4 x 1\" nylon screws \u0026amp; 4 x nylon hex nuts, it goes together in a jiffy and looks super-spiffy!\u003c\/p\u003e\n\u003cp\u003eThis product is designed specifically for our 16 x 2 USB\/Serial backpacks.  Our OLED 16 x 2 displays and RGB backlight positive and negative LCDs have slightly smaller screw holes so you'll have to drill them out to fit the #4-40 screws if you want to use them together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCharacter LCD NOT included\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eWe have a lovely tutorial on assembling the stand and setting up an LCD system monitor for Windows, Mac or Linux\/Raspberry Pi computers.\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOverview and Tutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930761130073,"sku":"nyo1789672071616","price":4.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/acrylic-stand-for-16-x-2-character-lcd_1.jpg?v=1789672076"},{"product_id":"adafruit-16-channel-12-bit-pwmservo-shield-i2c-interface","title":"Adafruit 16-Channel 12-bit PWM\/Servo Shield - I2C interface","description":"\u003cp\u003eYou want to make a cool Arduino robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that the Arduino has only a few PWM outputs, and maybe those outputs are conflicting with another shield! What now? You could give up OR you could just get our handy PWM and Servo driver shield. It's just like our popular PWM\/Servo Breakout but now Arduino-ready and works with any Arduino that uses shields: Uno, Leo, Mega, ADK, it's all good.\u003c\/p\u003e\n\u003cp\u003eWhen we saw this chip, we quickly realised what an excellent add-on this would be. Using only two I2C pins, control 16 free-running PWM outputs! You can even stack up 62 shields to control up to 992 PWM outputs (which we would really like to see since it would be glorious and like 4 feet tall) Because I2C is a shared bus you can also connect other I2C devices and sensors to the SCL\/SDA pins as long as their addresses don't conflict (this shield has address 0x40)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThere's an I2C-controlled PWM driver with a built-in clock. That means that, unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running!\u003c\/li\u003e\n\u003cli\u003eIt is 5V compliant, which means you can control it from a 3.3V Arduino and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)\u003c\/li\u003e\n\u003cli\u003e6 address select pins so you can stack up to 62 of these on a single i2c bus. 12 out of 16 output pins can be accessed when stacked.\u003cbr\u003eAdjustable frequency PWM up to about 1.6 KHz\u003c\/li\u003e\n\u003cli\u003e12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate\u003c\/li\u003e\n\u003cli\u003eConfigurable push-pull or open-drain output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe wrapped up this lovely chip into a shield with a couple of nice extras\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal block for power input (or you can use the 0.1\" breakouts on the side)\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection on the terminal block input\u003c\/li\u003e\n\u003cli\u003eGreen and red power-good LEDs\u003c\/li\u003e\n\u003cli\u003e3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1\" so you can only stack 4 next to each other on 0.1\" header\u003c\/li\u003e\n\u003cli\u003eStackable design. You'll need to pick up stacking headers and right-angle 3x4 headers in order to stack on top of this shield without the servo connections getting in the way.\u003c\/li\u003e\n\u003cli\u003eA spot to place a big capacitor on the V+ line (in case you need it)\u003c\/li\u003e\n\u003cli\u003e220 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial\u003c\/li\u003e\n\u003cli\u003eSolder jumpers for the 6 address select pins\u003c\/li\u003e\n\u003cli\u003eA lot of extra space remaining? Let's turn it into a prototyping area. You get a 5x20 proto area for any extra wiring you'd like to add\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis product comes with a fully tested and assembled shield as well as 4 pieces of 3x4 male straight header (for servo\/LED plugs), a 2-pin terminal block (for power) and a stick of 0.1\" header so you can plug into an Arduino. A little light soldering will be required to assemble and customise the board by attaching the desired headers but it is a 15-minute task that even a beginner can do. If you want to use right-angle 3x4 headers, we also carry a 4-pack in the shop - \u003cstrong\u003enote that only 3 of them can be used when stacking (12 servos total).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eServos and Arduino are NOT included\u003c\/strong\u003e - but we do sell tons of different servos in the shop so pick up a few while you're here!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The terminal blocks included with your product may be blue or black.\u003c\/p\u003e\n\u003cp\u003eCheck out our tutorial with Arduino and you can get our documented Arduino library which has both PWM and Servo examples!\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eRevision History:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAs of July 29th, 2024\u003c\/b\u003e – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (no headers or terminal block) 54mm x 70mm x 3mm\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit addresses between 0x60-0x80, selectable with jumpers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930762899545,"sku":"dcf1789672210952","price":15.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adafruit-16-channel-12-bit-pwmservo-shield---i2c-interface_1.jpg?v=1789672216"},{"product_id":"ds2413-1-wire-two-gpio-controller-breakout","title":"DS2413 1-Wire Two GPIO Controller Breakout","description":"\u003cp\u003eYou're too cool for I2C, and SPI has so many wires, 8-bit parallel... how can that be fashionable!? You are a 1-Wire kinda gal, and you want more 1-Wire breakouts in your life to complement all of your great engineering. Well rock on, because here you go, it's a 1-Wire controller with two open-drain GPIO.\u003c\/p\u003e\n\u003cp\u003eYou can put as many of the DS2413s as you want on a single I\/O line, each one is uniquely addressable and shares the single I\/O pin happily. The two controllable I\/O lines (PIOA and PIOB) can be used as inputs or outputs. They are open-drain, so if you want to power an LED or something, you'll need a remote power supply (see Maxim's product page for more details)\u003c\/p\u003e\n\u003cp\u003eWe have a basic Arduino sketch that uses the OneWire library to communicate with this chip. Don't forget to add the 4.7 Kohm resistor from I\/O to your 1-Wire controller power supply (3.3V - 5V) on the Arduino side of the wires.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eRevision History\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAs of August 1st, 2024\u003c\/b\u003e – We've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 15.78mm x 9.96mm x 2.94mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorials and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930764374105,"sku":"kqg1789672301862","price":5.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/ds2413-1-wire-two-gpio-controller-breakout_1.jpg?v=1789672307"},{"product_id":"stereo-21w-class-d-audio-amplifier-tpa2012","title":"Stereo 2.1W Class D Audio Amplifier - TPA2012","description":"\u003cp\u003eThis incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4-ohm impedance speakers (@ 10% THD). Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when driving an 8Ω speaker at 1.5 watts) - making it perfect for portable and battery-powered projects. It has built-in thermal and over-current protection but we could barely tell it got hot. This board is a welcome upgrade to basic \"LM386\" amps!\u003c\/p\u003e\n\u003cp\u003eThe inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the R- and L- to the ground. The outputs are \"Bridge Tied\" - which means they connect directly to the outputs, with no connection to the ground. The output is a ~300KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output to another amplifier, it should drive the speakers directly.\u003c\/p\u003e\n\u003cp\u003eComes with a fully assembled and tested breakout board with 1.0uF input capacitors. We also include a dual mini DIP switch for setting the amplifier gain on the fly, 3.5mm screw-terminal blocks so you can easily attach\/detach your speakers, and some header in case you want to plug it into a breadboard. You will be ready to rock in 15 minutes! \u003cstrong\u003eSpeakers are NOT included\u003c\/strong\u003e, use any 4-ohm or 8-ohm impedance speakers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutput Power: 2.1W at 4Ω, 10% THD, 1.4W at 8Ω, 10% THD, with 5V Supply\u003c\/li\u003e\n\u003cli\u003ePSRR: 77 dB typ @ 217 Hz with 6 dB gain\u003c\/li\u003e\n\u003cli\u003eDesigned for use without an output filter, when wires are kept at under 2\"-4\" long\u003c\/li\u003e\n\u003cli\u003eFour pin-selectable gains: 6dB, 12dB, 18dB and 24 dB. Select with the onboard switches or by setting the G0 and G1 breakout pins (see schematic for breakout board showing gain pin settings for details)\u003c\/li\u003e\n\u003cli\u003eExcellent click-and-pop suppression\u003c\/li\u003e\n\u003cli\u003eThermal shutdown protection\u003c\/li\u003e\n\u003cli\u003eIndependent channel shutdown\u003c\/li\u003e\n\u003cli\u003eLow current draw: typ 6mA quiescent and 1.5uA in shutdown mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the tutorial for more details!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e:\u003cstrong\u003e The terminal blocks included with your product may be blue or black.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of August 1st, 2024\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- We added a pre-soldered terminal block.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (without 0.1\" header): 22.96mm x 28.33mm x 4.97mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.56g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and Downloads\u003c\/li\u003e\n\u003cli\u003eTPA2012 Datasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930764505177,"sku":"dwq1789672308963","price":9.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/stereo-21w-class-d-audio-amplifier---tpa2012_1.jpg?v=1789672313"},{"product_id":"mcx-jack-to-sma-rf-cable-adapter","title":"MCX Jack to SMA RF Cable Adapter","description":"\u003cp\u003e\u003cstrong\u003eThis MCX to SMA RF Adapter makes it easy to connect devices with an MCX connector to SMA antennas or cables, providing a simple and reliable solution for RF testing, prototyping, and wireless projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eThis \u003cstrong\u003eRF adapter\u003c\/strong\u003e is ideal for anyone working with RF equipment. If your receiver, transmitter, or transceiver has an \u003cstrong\u003eMCX connector\u003c\/strong\u003e but you want to connect it to an \u003cstrong\u003eSMA antenna\u003c\/strong\u003e, this handy adapter makes it quick and easy.\u003c\/p\u003e\n\u003cp\u003eIt provides a simple, reliable way to bridge the two connector types without needing to modify your existing hardware.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConnects MCX connectors to SMA antennas\u003c\/li\u003e\n\u003cli\u003eCompatible with receivers, transmitters and transceivers\u003c\/li\u003e\n\u003cli\u003eNo hardware modification required\u003c\/li\u003e\n\u003cli\u003eQuick and easy installation\u003c\/li\u003e\n\u003cli\u003eReliable RF connector adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 260.35 \/ 10.25\"\u003c\/li\u003e\n\u003cli\u003eWeight: 8.92g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x MCX Jack to SMA RF Cable Adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930765291609,"sku":"ngj1789672340774","price":3.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/mcx-jack-to-sma-rf-cable-adapter_1.jpg?v=1789672345"},{"product_id":"lock-style-solenoid-12vdc","title":"Lock-style Solenoid - 12VDC","description":"\u003cp\u003e\u003cstrong\u003eThis Locking Solenoid provides a simple electrically controlled locking mechanism, using a spring-loaded metal bolt that retracts when powered, making it ideal for cabinets, enclosures, doors, and access-control projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eSolenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the centre of the coil. This makes the solenoid able to pull from one end.\u003c\/p\u003e\n\u003cp\u003eThis solenoid in particular is nice and strong, and has a slug with a slanted cut and a good mounting bracket. It's basically an \u003cstrong\u003eelectronic lock\u003c\/strong\u003e, designed for a \u003cstrong\u003ebasic cabinet\u003c\/strong\u003e or \u003cstrong\u003esafe \u003c\/strong\u003eor \u003cstrong\u003edoor\u003c\/strong\u003e. Normally the lock is active so you can't open the door because the solenoid slug is in the way. It does not use any power in this state. When \u003cstrong\u003e9-12VDC\u003c\/strong\u003e is applied, the slug pulls in so it doesn't stick out anymore and the door can be opened.\u003c\/p\u003e\n\u003cp\u003eThe solenoids come with the slanted slug as shown above, but you can open it with the two Phillips-head screws and turn it around so its rotated \u003cstrong\u003e90\u003c\/strong\u003e, \u003cstrong\u003e180 \u003c\/strong\u003eor \u003cstrong\u003e270 \u003c\/strong\u003edegrees so that it matches the door you want to use it with.\u003c\/p\u003e\n\u003cp\u003eTo drive a solenoid you will need a power transistor and a diode, check this diagram for how to wire it to an Arduino or other microcontroller. You will need a fairly good power supply to drive a solenoid, as a lot of current will rush into the solenoid to charge up the electro-magnet, about \u003cstrong\u003e500mA\u003c\/strong\u003e, so don't try to power it with a 9V battery!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/92kwSeiwI3U?si=Zv9jH-8uRL6pxBqG\u0026amp;start=497\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStrong electromagnetic lock solenoid for cabinets, safes and doors\u003c\/li\u003e\n\u003cli\u003e9-12VDC operating voltage\u003c\/li\u003e\n\u003cli\u003eNormally-locked design (no power required to maintain locked state)\u003c\/li\u003e\n\u003cli\u003eSlanted metal slug for directional locking\u003c\/li\u003e\n\u003cli\u003eAdjustable slug orientation (0°, 90°, 180°, 270°)\u003c\/li\u003e\n\u003cli\u003eIncludes mounting bracket\u003c\/li\u003e\n\u003cli\u003eApproximately 500mA current draw\u003c\/li\u003e\n\u003cli\u003eRequires power transistor and diode for microcontroller integration\u003c\/li\u003e\n\u003cli\u003eRequires dedicated power supply (not suitable for battery operation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12VDC (you can use 9-12 DC volts, but lower voltage results in weaker\/slower operation)\u003c\/li\u003e\n\u003cli\u003eDraws 650mA at 12V, 500 mA at 9V when activated\u003c\/li\u003e\n\u003cli\u003eDesigned for 1-10 seconds long activation time\u003c\/li\u003e\n\u003cli\u003eMax Dimensions: 41.85mm x 53.57mm x 27.59mm \u003c\/li\u003e\n\u003cli\u003eDimensions: 23.57mm x 67.47mm x 27.59mm \u003c\/li\u003e\n\u003cli\u003eWire length: 222.25mm\u003c\/li\u003e\n\u003cli\u003eWeight: 147.71g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eDriver diagram\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Lock-style Solenoid - 12VDC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930765389913,"sku":"nst1789672344614","price":12.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/lock-style-solenoid---12vdc_1.jpg?v=1789672348"},{"product_id":"medium-surface-transducer-with-wires-4-ohm-3-watt","title":"Medium Surface Transducer with Wires - 4 Ohm 3 Watt","description":"\u003cp\u003eTurn any surface\/wall\/table etc into a speaker with a surface transducer. This type of speaker does not have a moving cone like most speakers you've seen. Instead, a small metal rod is wrapped with the voice coil. When current is pulsed through the coil, the magnetic field causes a piece of metal to expand and contract - and if it's pressed against a surface it turns the transducer into a speaker!\u003cbr\u003e\u003cbr\u003eOften these size transducers are pressed up against a flat surface to turn it into a sounding board. The effect is a surprisingly clear sound that comes from the surface itself. The body of the transducer is heavy so that it can be placed with the top down on a table. And for another fun trick, put the transducer at the end of a large plastic cup to point sound in a particular direction.\u003cbr\u003e\u003cbr\u003eThis transducer is about 28mm in diameter and has 4Ω impedence and should be run at about 3W. It pairs great with any of our audio amps such as the TS2012 breakout or MAX98306. Just connect it as you would any other speaker, we even have some wires pre-soldered on.\u003c\/p\u003e\n\u003ch3\u003eRevision History:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAs of February 21st, 2024\u003c\/strong\u003e - The design of the Medium Surface Transducer has been updated, the previous design is no longer available, but this one has equivalent functionality. The transducer no longer comes with wires already attached but does come with 3M double-sided tape on the bottom to help with mounting to any flat surface.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/zW8jyBU3MuE?si=PgYzOLCsU5kkiBMF\u0026amp;start=52\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930767618137,"sku":"mdd1789672493634","price":13.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/medium-surface-transducer-with-wires---4-ohm-3-watt_1.jpg?v=1789672497"},{"product_id":"adafruit-music-maker-mp3-shield-for-arduino-with-3w-stereo-amp-v10","title":"Adafruit \"Music Maker\" MP3 Shield for Arduino with 3W Stereo Amp (v1.0)","description":"\u003cp\u003eBend all audio files to your will with the Adafruit Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding\/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally.\u003c\/p\u003e\n\u003cp\u003eAll this functionality is implemented in a lightweight SPI interface so that any Arduino can play audio from an SD card. There's also a special MIDI mode that you can boot the chip into that will read 'classic' 31250Kbaud MIDI data from an Arduino pin and act like a synth\/drum machine - there are dozens of built-in drum and sample effects! But the chip is a pain to solder and needs a lot of extras. That's why we spun up the best shield, which is perfect for use with any Arduino Uno, Leonardo, or Mega.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis version of the shield includes an onboard 3W\/channel stereo audio amplifier that can drive 4 or 8-ohm speakers\u003c\/strong\u003e. It's the same amplifier as in our TS2012 breakout, a great class D amplifier that sounds good and is power-conscious for portable\/battery usage. Volume control is handled by the VS1053 chip. We also have a version without an amplifier, when only line\/headphone out is required.\u003c\/p\u003e\n\u003cp\u003eWe believe this is the best MP3 playing shield you can get, and at a great price too. Here are some specs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures the VS1053B codec chip - decoding Ogg Vorbis, MP3\/MP2\/MP1, MP4, AAC, WMA, FLAC, WAV\/PCM, and MIDI. Encodes Ogg or WAV\/PCM\u003c\/li\u003e\n\u003cli\u003eStereo audio out with proper audio filter caps and ground reference so it can be safely connected directly to headphones, a stereo system or other powered speakers\u003c\/li\u003e\n\u003cli\u003e7 extra GPIOs that can be written or read through the Arduino Library for reading buttons or lighting LEDs\u003c\/li\u003e\n\u003cli\u003eMicroSD card socket, for any FAT16\/FAT32 formatted SD card from 64Mb or greater.\u003c\/li\u003e\n\u003cli\u003eFull 3.3\/5V level shifting for SD and MP3 chipsets\u003c\/li\u003e\n\u003cli\u003eWorks with Arduino Uno, Mega, or Leonardo\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in MIDI synth\/drum machine with dozens of instruments\u003c\/li\u003e\n\u003cli\u003ePlenty of optional breakouts for pins like the card-detect and microphone input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach order comes with one fully assembled and tested shield, 2 2-pin terminal blocks, a stick of 0.1\" male header and a 2 x 3 female header for the ICSP connection. Some light soldering is required to attach the through-hole headers to the PCB for plugging into the Arduino as well as the terminal blocks for the speakers. \u003cstrong\u003eSpeakers, headphones, an SD card and Arduino are NOT included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe're wrapping up the full tutorial with photos of the shield, but for now, we have a detailed tutorial with lots of information about the VS1053 as well as instructions for how to use our Arduino library that will get you playing sound effects in under 30 minutes.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAs of Aug 28, 2024 - \u003c\/b\u003ewe've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen. We've also updated the music maker to use the 2x3 SPI header instead of pins 11\/12\/13  and the terminal blocks now come pre-soldered on.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (assembled): 69mm x 53mm x 2mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14.7g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930767650905,"sku":"sqv1789672498945","price":29.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adafruit-music-maker-mp3-shield-for-arduino-with-3w-stereo-amp-v10_1.jpg?v=1789672503"},{"product_id":"usbserial-converter-ft232rl","title":"USB\/Serial Converter (FT232RL)","description":"\u003cp\u003eThis USB cable adds a DB9 serial port to your computer or laptop. Works with MacOS X, Linux and Windows. Note that this provides (approximately) +-6V serial (RS232) not 5V serial (TTL), good for old devices like GPS, handhelds, programmers, etc with chunky DB9's on the side. Some cheaper RS232 cables 'cheat' and only give you 0-5V which wont work with some devices - this one has a true voltage doubler\/inverter to make it more compatible.\u003cbr\u003e\u003cbr\u003eThese are tested and work great with bit-bang serial programmers and adapters - note that they are slow in comparison to hardware serial ports due to the high overhead of USB.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNew!\u003c\/strong\u003e we just upgraded our adapters to be way more awesome. They're now FTDI-chip based for better performance and reliability. The drivers are rock solid and available for pretty much every operating system you will run across. Even better, inside are three visible LEDs: a power LED (letting you know its plugged in and working) and RX\/TX LEDs that you can use to help debug your connection. These are now our favorite RS232 adapters!\u003cbr\u003e\u003cbr\u003eUsing our older \"gray\" PL2303 converter? It comes with a CD but we strongly suggest using the most recent drivers from the Prolific Website if you're running windows and the 'fixed' driver for Mac OSX or the version for MacOS 64 bit. If you're using Windows 7 and you have issues, try the Prolific driver version 1.013 (This is only for the older \"PL2303\" based converter)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\u003cli\u003eCable Length: 1.37m \/ 54.25\" \/ may be up to 2m long\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eIf you're having some issues with Win 7\/8 driver installation, please try the following:\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003estart win 7 or win 8, click start menu, input \u003cstrong\u003eCMD\u003c\/strong\u003e and run to start the command window. Type in the following command: \u003cstrong\u003ebcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ethen input: \u003cstrong\u003ebcdedit -set TESTSIGNING ON \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ethen re-start computer, computer will go into testing mode, install the driver from the CD. When ready, run CMD againa and run input: \u003cstrong\u003ebcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ethen run: \u003cstrong\u003ebcdedit -set TESTSIGNING OFF \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930768175193,"sku":"ucn1789672543018","price":14.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/usbserial-converter-ft232rl_1.jpg?v=1789672551"},{"product_id":"adafruit-music-maker-mp3-shield-for-arduino-mp3oggwav","title":"Adafruit \"Music Maker\" MP3 Shield for Arduino (MP3\/Ogg\/WAV...)","description":"\u003cp\u003eBend all audio files to your will with the Adafruit Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding\/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally.\u003cbr\u003e\u003cbr\u003eAll this functionality is implemented in a light-weight SPI interface so that any Arduino can play audio from an SD card. There's also a special MIDI mode that you can boot the chip into that will read 'classic' 31250Kbaud MIDI data from an Arduino pin and act like a synth\/drum machine - there are dozens of built-in drum and sample effects! But the chip is a pain to solder, and needs a lot of extras. That's why we spun up the best shield, perfect for use with any Arduino Uno, Leonardo or Mega.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis version of the shield only has stereo line\/headphone output.\u003c\/strong\u003e We also have a version with a 3W\/channel class-D stereo speaker amplifier for easy use in projects that need to be loud\u003cbr\u003e\u003cbr\u003eWe believe this is the best MP3 playing shield you can get, and at a great price too. Here are some specs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures the VS1053B codec chip - decodes Ogg Vorbis, MP3\/MP2\/MP1, MP4, AAC, WMA, FLAC, WAV\/PCM, MIDI. Encodes Ogg or WAV\/PCM\u003c\/li\u003e\n\u003cli\u003eStereo audio out with proper audio filter caps and ground reference so it can be safely connected directly to headphones, a stereo system or other powered speakers\u003c\/li\u003e\n\u003cli\u003e7 extra GPIO's that can be written or read through the Arduino Library for reading buttons or lighting LEDs\u003c\/li\u003e\n\u003cli\u003eMicroSD card socket, for any FAT16\/FAT32 formatted SD card from 64Mb or greater.\u003c\/li\u003e\n\u003cli\u003eFull 3.3\/5V level shifting for SD and MP3 chipsets\u003c\/li\u003e\n\u003cli\u003eWorks with Arduino Uno, Mega, or Leonardo\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in MIDI synth\/drum machine with dozens of instruments\u003c\/li\u003e\n\u003cli\u003ePlenty of optional breakouts for pins like the card-detect and microphone input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach order comes with one fully assembled and tested shield, 2 2-pin terminal blocks, a stick of 0.1\" male header and a 2 x 3 female header for the ICSP connection. Some light soldering is required to attach the through-hole headers to the PCB for plugging into the Arduino as well as the terminal blocks for the speakers. \u003cstrong\u003eSpeakers, headphones, SD card and Arduino are not included!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eWe have a detailed tutorial with lots of information about the VS1053 as well as instructions for how to use our Arduino library that will get you playing sound effects in under 30 minutes.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of August 28th, 2024\u003c\/strong\u003e – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (assembled): 69mm x 53mm x 2mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14.7g\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930768240729,"sku":"wdu1789672549287","price":26.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adafruit-music-maker-mp3-shield-for-arduino-mp3oggwav_1.jpg?v=1789672554"},{"product_id":"adjustable-bent-wire-stand-up-to-7-tablets-and-small-screens","title":"Adjustable Bent-Wire Stand - up to 7\" Tablets and Small Screens","description":"\u003cp\u003e\u003cstrong\u003eThis Adjustable Display Stand provides a simple and stable way to support TFT displays, tablets, and other electronics, with a foldable, angle-adjustable design that's ideal for desktops, demos, and development work.\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eThis handy \u003cstrong\u003ebent-wire display stand\u003c\/strong\u003e was originally designed to hold up \u003cstrong\u003e7\"\u003c\/strong\u003e tablets but the rubberized design is great for general purpose \u003cstrong\u003eelectronics \u0026amp; TFT holding\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWe use it to hold up our HDMI displays while connected to a Pi - even though it is meant for \u003cstrong\u003e7\" \u003c\/strong\u003ewe found that its fine for\u003cstrong\u003e 5\"\u003c\/strong\u003e to \u003cstrong\u003e10\"\u003c\/strong\u003e \u003cstrong\u003eTFTs\u003c\/strong\u003e since they're not as heavy as a tablet. You can adjust the angle and collapse it for travel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e: Screens are not included. Stand only. \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/bMnwgO8dxxQ?si=-Mt8EnQESySp4Did\u0026amp;start=1063\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBent-wire design originally engineered for 7\" tablets\u003c\/li\u003e\n\u003cli\u003eRubberised grip suitable for general electronics and TFT displays\u003c\/li\u003e\n\u003cli\u003eCompatible with 5\" to 10\" screens\u003c\/li\u003e\n\u003cli\u003eAdjustable viewing angle\u003c\/li\u003e\n\u003cli\u003eCollapsible for portability and travel\u003c\/li\u003e\n\u003cli\u003eIdeal for Raspberry Pi HDMI displays and similar devices\u003c\/li\u003e\n\u003cli\u003eLightweight construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully extended: 128mm tall x 93mm wide\u003c\/li\u003e\n\u003cli\u003eTop arm lowered: 73mm tall\u003c\/li\u003e\n\u003cli\u003eWeight: 86g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adjustable Bent-Wire Stand - up to 7\" Tablets and Small Screen\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930768404569,"sku":"vmm1789672558630","price":4.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adjustable-bent-wire-stand---up-to-7-tablets-and-small-screens_1.jpg?v=1789672563"},{"product_id":"adjustable-breadboard-power-supply-kit-v10","title":"Adjustable Breadboard Power Supply Kit (v1.0)","description":"\u003cp\u003eThis kit is for making your own breadboard-friendly very low dropout adjustable power supply. A good power supply is essential to electronic projects. While there are many existing designs for adjustable power supplies, this one makes improvements that make it more useful for hobby designs\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMIC2941 regulator has guaranteed 1.25A output\u003c\/li\u003e\n\u003cli\u003eLow dropout, only 40mV - 400mV compared to 1.25V - 2.0V for LM317. This means you can use a wider range of output voltages including generating 3.3V from as low as 3.7V (such as 3 AAs or a lithium-ion battery)!\u003c\/li\u003e\n\u003cli\u003eShort circuit and overheating protection\u003c\/li\u003e\n\u003cli\u003eInput diode to protect circuitry from negative voltages or AC power supplies.\u003c\/li\u003e\n\u003cli\u003e2.1mm DC jack and terminal connector for voltage inputs\u003c\/li\u003e\n\u003cli\u003eTwo indicator LEDs for high and low voltages\u003c\/li\u003e\n\u003cli\u003eOutput selection switch to select from \u003cstrong\u003e3.3v, \u003c\/strong\u003e \u003cstrong\u003e5v \u003c\/strong\u003eand \u003cstrong\u003eAdjustable \u003c\/strong\u003e(also has a breakout for the voltage you're powering the board with)\u003c\/li\u003e\n\u003cli\u003eOnboard potentiometer for adjusting voltage from 1.25V up to within 0.5V of the input voltage. (20V max)\u003c\/li\u003e\n\u003cli\u003eOn\/Off switch for the entire board\u003c\/li\u003e\n\u003cli\u003eHeat sink included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe project kit comes as components to be soldered to the included PCB. It's not a difficult project, about 30-45 minutes with a soldering iron. Even beginners can make it! You'll need a soldering iron, solder, diagonal cutters and a PCB holder such as a helping hand tool. A breadboard and battery clip or DC power supply is not included, you can use any DC power supply with a 2.1mm plug (we have a nice one in the shop).\u003cbr\u003e\u003cbr\u003eFor design documents, instructions, parts list, etc. Check out the project webpage!\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of August 28th, 2024\u003c\/strong\u003e- This kit now includes a smoother SPDT on\/off slide switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (PCB only): 54mm x 21mm x 1.6mm\u003c\/li\u003e\n\u003cli\u003eDimensions (assembled): 54mm x 43mm x 16.6mm\u003c\/li\u003e\n\u003cli\u003eWeight: 16g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930769322073,"sku":"pix1789672610495","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adjustable-breadboard-power-supply-kit-v10_1.jpg?v=1789672618"},{"product_id":"adafruit-spi-non-volatile-fram-breakout-64kbit-8kbyte","title":"Adafruit SPI Non-Volatile FRAM Breakout - 64Kbit \/ 8KByte","description":"\u003cp\u003eFRAM, or Ferroelectric Ram, is the coolest new data storage method that all the fashion magazines are talking about. Oh wait, no that's quilted handbags. But FRAM is pretty damn cool too! It's similar to Dynamic random-access memory, only with a ferroelectric layer instead of a dielectric layer. This gives it stable handling (the bytes you write are non-volatile) with dynamic responsiveness (you can write them very fast!)\u003cbr\u003e\u003cbr\u003eNow, with our SPI FRAM breakout board you can add some FRAM storage to your next DIY project. FRAM allows for a lower power usage and a faster write performance. It's excellent for low-power or inconsistent-power datalogging or data buffering where you want to stream data fast while also keeping the data when there's no power. Unlike Flash or EEPROM there's no pages to worry about. Each byte can be read\/written 10,000,000,000,000 times so you don't have to worry too much about wear leveling.\u003cbr\u003e\u003cbr\u003eThis particular FRAM chip has 64 Kbits (8 KBytes) of storage, interfaces using SPI, and can run at up to 20MHz SPI clock rates. Each byte can be read and written instantaneously (like SRAM) but will keep the memory for 95 years at room temperature.\u003cbr\u003e\u003cbr\u003eWe picked up the largest chip that has SPI and is also 5V compliant. You can use this chip with either 3V or 5V power and logic. It comes in a breadboard-friendly breakout and a spare stick of 0.1\" male header for soldering on.\u003cbr\u003e\u003cbr\u003eWe also have an I2C FRAM breakout board - which is large in size but slower (1MHz max I2C clock rate)\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAs of September 4th, 2024\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– We updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 15.5mm x 20mm x 2mm \/ 0.6\" x 0.8\" x 0.1\"\u003c\/li\u003e\n\u003cli\u003eMounting Holes Spacing: 14mm \/ 0.6\"\u003c\/li\u003e\n\u003cli\u003eWeight: 1.2g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheets, PCB CAD files, Fritzing objects, etc are available in the tutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930772467801,"sku":"fss1789672647281","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adafruit-spi-non-volatile-fram-breakout---64kbit-8kbyte_1.jpg?v=1789672651"},{"product_id":"powerboost-500-basic-5v-usb-boost-500ma-from-18v","title":"PowerBoost 500 Basic - 5V USB Boost @ 500mA from 1.8V+","description":"\u003cp\u003ePowerBoost is the perfect power supply for your portable project! This little DC\/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. Like our popular 5V 1A USB wall adapter, we tweaked the output to be 5.2V instead of a straight-up 5.0V so that there's a little bit of 'headroom' long cables, high draw, the addition of a diode on the output if you wish, etc. The 5.2V is safe for all 5V-powered electronics like Arduino, Raspberry Pi, or Beagle Bone while preventing icky brown-outs during high current draw because of USB cable resistance.\u003cbr\u003e\u003cbr\u003eThe PowerBoost 500 has at the heart a TPS61090 boost converter from TI. This boost converter chip has some really nice extras such as low battery detection, a 2A internal switch, synchronous conversion, excellent efficiency, and 700KHz high-frequency operation. Check out these specs!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSynchronous operation means you can disconnect the output completely by connecting the \u003cstrong\u003eEN\u003c\/strong\u003eable pin to the ground. This will completely turn off the output\u003c\/li\u003e\n\u003cli\u003e2A internal switch (~2.5A peak limiting) means you can get \u003cstrong\u003e500mA+ from as low as 1.8V\u003c\/strong\u003e, \u003cstrong\u003e750mA+ from 2 NiMH\u003c\/strong\u003e or Alkaline batteries, and at least \u003cstrong\u003e1000mA from a 3.7V LiPoly\/LiIon battery\u003c\/strong\u003e or 3 NiMH\/Alkalines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow battery indicator LED\u003c\/strong\u003e lights up red when the voltage dips below 3.2V, optimized for the most common usage of LiPo\/LiIon battery usage\u003c\/li\u003e\n\u003cli\u003eOn-board 500mA charge-rate 'Apple\/iOS' data resistors. Solder in the included USB connector and you can plug in any iPhone or iPod for a 500mA charge rate. Not suggested for iPad (which really needs a 1A charge rate).\u003c\/li\u003e\n\u003cli\u003eFull breakout for battery in, control pins and power out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90%+ operating efficiency\u003c\/strong\u003e in most cases (see datasheet for efficiency graphs), and low quiescent current: 5mA when enabled and power LED is on, 20uA when disabled (power and low batt LED are off)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGreat for powering your robot, Arduino project, or single-board computers such as Raspberry Pi or BeagleBone! Each order comes with one fully assembled and tested PCB and a loose USB A jack. If you are powering your project from USB, solder the USB A jack in (a 3-minute soldering task). If you would like to use a terminal block, pick up a 3.5mm 2-pin block here and solder to the output spot where the USB jack would go. Or don't solder anything in for a more compact power pack.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of September 4th, 2024\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen. You may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e28mm x 22mm x 2mm\u003c\/li\u003e\n\u003cli\u003eHeight w\/ JST: 7mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eOverview and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930774270041,"sku":"pgc1789672731169","price":8.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/powerboost-500-basic---5v-usb-boost-500ma-from-18v_1.jpg?v=1789672735"},{"product_id":"28-tft-touch-shield-for-arduino-with-capacitive-touch","title":"2.8\" TFT Touch Shield for Arduino with Capacitive Touch","description":"\u003cp\u003eAdd some sizzle to your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection and a capacitive touchscreen. This TFT display is big (2.8\" diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display has a capacitive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.\u003cbr\u003e\u003cbr\u003eThis shield is the capacitive version as opposed to the resistive touchscreen we also sell. This touchscreen doesn't require pressing down on the screen with a stylus, and has a nice glossy glass cover. It is a single-touch display.\u003cbr\u003e\u003cbr\u003eThis shield uses SPI for the display and SD card and is easier to use with UNO, Mega \u0026amp; Leonardo Arduino's. The capacitive touchscreen controller uses I2C but you can share the I2C bus with other I2C devices.\u003cbr\u003e\u003cbr\u003eThe shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you'll have it running in under 10 minutes! Works best with any classic Arduino (UNO\/Duemilanove\/Diecimila). Solder three jumpers and you can use it at full speed on a Leonardo or Mega as well.\u003cbr\u003e\u003cbr\u003eThis display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. This shield needs fewer pins than our v1 shield, so you can connect more sensors, buttons and LEDs: 5 SPI pins for the display, 2 shared I2C pins for the touchscreen controller and another pin for uSD card if you want to read images off of it.\u003cbr\u003e\u003cbr\u003eOf course, we wouldn't just leave you with a datasheet and a \"good luck!\" - we've written a full open source graphics library that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x \u0026amp; y location and example code to demonstrate all of it. The code is written for Arduino but can be easily ported to your favorite microcontroller!\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of the 19th of June 2023\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– We've updated this TFT breakout with a\u003cspan\u003e \u003c\/span\u003eQT port! We also used\u003cspan\u003e \u003c\/span\u003eAfruit Pindaguin\u003cspan\u003e \u003c\/span\u003eto make a lovely silkscreen. The board is otherwise the same size, pinout, and functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/zxqhKr-R724?start=108\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e240x320 resolution, 18-bit (262,000) colour - our library uses 16 bit colour mode\u003c\/li\u003e\n\u003cli\u003eHigh speed SPI display with digital I2C touchscreen driver\u003c\/li\u003e\n\u003cli\u003eThe display uses digital pins 13-9. Touchscreen controller requires I2C pins SDA and SCL. microSD pin requires digital #4. That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available if not using the microSD\u003c\/li\u003e\n\u003cli\u003eWorks with any classic Arduino '328. Solder closed three jumpers to use the ICSP header for use with Leonardo or Mega\u003c\/li\u003e\n\u003cli\u003eOnboard 3.3V @ 300mA LDO regulator, current draw depends on usage but is about 100mA for the display and touchscreen\u003c\/li\u003e\n\u003cli\u003e4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control\u003c\/li\u003e\n\u003cli\u003eSingle-touch capacitive touch bonded on top\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatsheets and PCB CAD Files\u003c\/li\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930774335577,"sku":"idt1789672733293","price":44.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/28-tft-touch-shield-for-arduino-with-capacitive-touch_1.jpg?v=1789672737"},{"product_id":"adafruit-i2c-non-volatile-fram-breakout-256kbit-32kbyte","title":"Adafruit I2C Non-Volatile FRAM Breakout - 256Kbit \/ 32KByte","description":"\u003cp\u003eFRAM, or Ferroelectric Ram, is the coolest new data storage method that all the fashion magazines are talking about. Oh, wait, no that's quilted handbags. But FRAM is pretty damn cool too! It's similar to Dynamic random-access memory, only with a ferroelectric layer instead of a dielectric layer. This gives it stable handling (the bytes you write are non-volatile) with dynamic responsiveness (you can write them very fast!)\u003cbr\u003e\u003cbr\u003eNow, with our I2C FRAM breakout board, you can add some FRAM storage to your next DIY project. FRAM allows for lower power usage and a faster write performance. It's excellent for low-power or inconsistent-power data logging or data buffering where you want to stream data fast while also keeping the data when there's no power. Unlike Flash or EEPROM, there are no pages to worry about. Each byte can be read\/written 10,000,000,000,000 times so you don't have to worry too much about wear leveling.\u003cbr\u003e\u003cbr\u003eThis particular FRAM chip has 256 Kbits (32 KBytes) of storage, interfaces using I2C, and can run at up to 1MHz I2C rates. Each byte can be read and written instantaneously (like SRAM) but will keep the memory for 95 years at room temperature.\u003cbr\u003e\u003cbr\u003eWe picked up the largest chip that has I2C and is also 5V compliant. You can use this chip with either 3V or 5V power and logic. It comes in a breadboard-friendly breakout and a spare stick of 0.1\" male header for soldering on.\u003cbr\u003e\u003cbr\u003eWe also have an SPI FRAM breakout board - which is smaller in size but faster (20MHz max SPI clock rate)\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eRevision History\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAs of September 4th, 2024\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e– we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 15.5mm x 20mm x 2mm \/ 0.6\" x 0.8\" x 0.1\"\u003c\/li\u003e\n\u003cli\u003eWeight: 1.2g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheets, EagleCAD PCB files, and Fritzing objects available in the tutorial\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930774368345,"sku":"pew1789672745908","price":9.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adafruit-i2c-non-volatile-fram-breakout---256kbit-32kbyte_1.jpg?v=1789672749"},{"product_id":"adafruit-mini-lipo-wmini-b-usb-jack-usb-liionlipoly-charger-v1","title":"Adafruit Mini Lipo w\/Mini-B USB Jack - USB LiIon\/LiPoly charger (v1)","description":"\u003cp\u003eOh so handy, this little lipo charger is so small and easy to use that you can keep it on your desk or mount it easily into any project! Simply plug it via any MiniUSB cable into a USB port and a 3.7V\/4.2V lithium polymer or lithium-ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy.\u003cbr\u003e\u003cbr\u003eCharging is performed in three stages: first, a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped up. The charge current is 100mA by default, so it will work with any size battery and USB port. If you want you can easily change it over to 500mA mode by soldering closed the jumper on the front, for when you'll only be charging batteries with 500mAh size or larger.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor use with Adafruit LiPoly\/LiIon batteries only! Other batteries may have different voltage, chemistry, polarity or pinout.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes assembled and tested with a free bonus JST cable!\u003c\/li\u003e\n\u003cli\u003e5V input via Mini-B USB connector\u003c\/li\u003e\n\u003cli\u003eFor charging single Lithium Ion\/Lithium Polymer 3.7\/4.2v batteries (not for older 3.6\/4.1v cells)\u003c\/li\u003e\n\u003cli\u003e100mA charge current, adjustable to 500mA by soldering a jumper closed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Batteries are \u003cstrong\u003eNOT \u003c\/strong\u003eincluded.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eRevision History\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAs of September 4th, 2024\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- this sensor breakout may come with black or tan JST connectors - they work the same!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 24mm x 19mm x 2mm\u003c\/li\u003e\n\u003cli\u003eHeight w\/ JST: 7mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nOverview and Downloads\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930774499417,"sku":"kjg1789672773601","price":5.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adafruit-mini-lipo-wmini-b-usb-jack---usb-liionlipoly-charger-v1_1.jpg?v=1789672778"},{"product_id":"adafruit-pro-trinket-5v-16mhz","title":"Adafruit Pro Trinket - 5V 16MHz","description":"\u003cp\u003e\u003cstrong\u003eDeprecation Warning: The Pro Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Pro Trinket so that people can maintain some older projects, we no longer recommend it. \u003c\/strong\u003ePlease check out the Metro Mini (ATmega328 @ 5V 16 MHz), ItsyBitsy 32u4 5V 16MHz, ItsyBitsy 32u4 @ 3.3V 8MHz or ItsyBitsy M0 @ 3V 48MHz. All have built-in USB and are comparable in price! The ItsyBitsys especially are about the same size and have native USB and tons of pins, so they're very close compatible.\u003c\/p\u003e\n\u003cp\u003eTrinket's got a big sister in town - the Pro Trinket 5V! Pro Trinket combines everything you love about Trinket with the familiarity of the common core Arduino chip, the ATmega328. It's like an Arduino Pro Mini with more pins and USB tossed in, so delicious.\u003c\/p\u003e\n\u003cp\u003eTrinket's a year old now, and while it's been great to see tons of tiny projects, sometimes you just need more pins, more FLASH, and more RAM. That's why we designed the Pro Trinket, with 18 GPIO, 2 extra analog inputs, 28K of flash, and 2K of RAM.\u003c\/p\u003e\n\u003cp\u003eLike the Trinket, it has onboard USB bootloading support - we opted for a MicroUSB jack this time. We also added Optiboot support, so you can either program your Pro Trinket over USB or with an FTDI cable just like the Pro Mini and friends.\u003c\/p\u003e\n\u003cp\u003eThe Pro Trinket PCB measures only 1.5\" x 0.7\" x 0.2\" (without headers) but packs much of the same capability as an Arduino UNO. So it's great once you've finished up a prototype on an official Arduino UNO and want to make the project smaller.\u003c\/p\u003e\n\u003cp\u003eThe Pro Trinket 5V uses the Atmega328P chip, which is the same core chip in the Arduino UNO\/Duemilanove\/Mini\/etc. at the same speed and voltage. So you'll be happy to hear that not only is Pro Trinket programmable using the Arduino IDE as you already set up, but 99% of Arduino projects will work out of the box!\u003c\/p\u003e\n\u003cp\u003eHere are some things you may have to consider when adapting Arduino sketches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePins #2 and #7 are not available (they are exclusively for USB)\u003c\/li\u003e\n\u003cli\u003eThe onboard 5V regulator can provide 150mA output, not 800mA out\u003c\/li\u003e\n\u003cli\u003eYou cannot plug shields directly into the Pro Trinket\u003c\/li\u003e\n\u003cli\u003eThere is no Serial-to-USB chip onboard. This is to keep the Pro Trinket small and inexpensive, you can use any FTDI cable to connect to the FTDI port for a Serial connection. The USB connection is for uploading new code only.\u003c\/li\u003e\n\u003cli\u003eThe bootloader on the Pro Trinket uses 4KB of FLASH so the maximum sketch size is 28,672 bytes. The bootloader does not affect RAM usage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHere are some handy specifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATmega328P onboard chip in QFN package\u003c\/li\u003e\n\u003cli\u003e16MHz clock rate, 28K FLASH available\u003c\/li\u003e\n\u003cli\u003eUSB bootloader with a nice LED indicator looks just like a USBtinyISP so you can program it with AVRdude and\/or the Arduino IDE (with a few simple config modifications).\u003c\/li\u003e\n\u003cli\u003eAlso has headers for an FTDI port for reprogramming\u003c\/li\u003e\n\u003cli\u003eMicro-USB jack for power and\/or USB uploading, you can put it in a box or tape it up and use any USB cable when you want to reprogram.\u003c\/li\u003e\n\u003cli\u003eOn-board 5.0V power regulator with 150mA output capability and ultra-low dropout. Up to 16V input, reverse-polarity protection, thermal and current-limit protection.\u003c\/li\u003e\n\u003cli\u003ePower with either USB or external output (such as a battery) - it'll automatically switch over\u003c\/li\u003e\n\u003cli\u003eOn-board green power LED and red pin #13 LED\u003c\/li\u003e\n\u003cli\u003eReset button for entering the bootloader or restarting the program.\u003c\/li\u003e\n\u003cli\u003eWorks with 99% of existing Arduino sketches (anything that doesn't use more than 28K, and doesn't require pins #2 and #7)\u003c\/li\u003e\n\u003cli\u003eMounting holes! Yeah!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnce headers are installed they can be fitted into 0.6\" wide sockets\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eRevision History\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAs of September 25th, 2024\u003c\/b\u003e – We've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e38mm x 18mm x 2mm\u003c\/li\u003e\n\u003cli\u003eHeight with MicroUSB: 4mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930774597721,"sku":"eqn1789672784150","price":10.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adafruit-pro-trinket---5v-16mhz_1.jpg?v=1789672788"},{"product_id":"adafruit-usb-isolator-100ma-isolated-lowfull-speed-usb","title":"Adafruit USB Isolator - 100mA Isolated Low\/Full Speed USB","description":"\u003cp\u003eHave some USB logic analyser, multimeter or oscilloscope and bumping up against the frustration of a shared earth ground? The Offspring (known for being electrical engineers) wisely sang \"Ya gotta keep'em isolated!\" Power and signal isolation improves common-mode voltage, enhances noise rejection, and permits two circuits to operate at different voltage levels.\u003c\/p\u003e\n\u003cp\u003eThis handy little low-cost USB Isolator is exactly what you need to provide protection against harmful noise, ground loops, surges, and spikes. Works with any 1.5Mbps (low speed) or 12Mbps (full speed) USB device. Not for high-speed USB devices, often used for video cameras (check your product to make sure it's low\/full compatible) Based on Analog Device's USB isolators.\u003c\/p\u003e\n\u003cp\u003eIt is particularly useful when paired with USB testing instruments, you need to separate or isolate your earth ground (through the USB connector to the computer to the power plug) from your circuit for high voltage, accident-protection, or floating ground needs. Best of all, this USB isolator even has its own isolated 5V power supply that can supply 100mA, making it perfect for your BitScope Micro USB! Protect your computer or laptop, use one of these in between your ports.\u003c\/p\u003e\n\u003cp\u003eThis is for use with 5V power, 3.3V logic USB devices only, we don't recommend it for use with any other protocol or voltages!\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of February 11th, 2025 -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThis board now has an SMT USB port. The previous version was THM. We've also updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of April 20, 2018 -\u003c\/strong\u003e we've made a small revision to exchange the Mini USB for a Micro USB connector. The design is otherwise identical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dtyl7k5dNDU?si=AoHl24Z56lJ9dQHD\u0026amp;start=228\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e52mm x 30mm x 10mm \/ 2\" x 1.2\" x 0.4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 8.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEagleCAD PCB files on GitHub\u003c\/li\u003e\n\u003cli\u003eFritzing object in Adafruit Fritzing Library\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930778726489,"sku":"xab1789672942698","price":31.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adafruit-usb-isolator---100ma-isolated-lowfull-speed-usb_1.jpg?v=1789672946"},{"product_id":"adafruit-audio-fx-sound-board-wavogg-trigger-with-2mb-flash","title":"Adafruit Audio FX Sound Board - WAV\/OGG Trigger with 2MB Flash","description":"\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cp\u003eWould you like to add audio\/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want to make a sound play whenever you press a button. What about something that has to be small and portable? You are probably feeling a little frustrated: it's been very hard to find a simple, low-cost audio effects trigger that is easy to use and does not require any programming\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUNTIL NOW!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDon't get me wrong, I love the MP3 Music Maker shield, and our Wave Shield is a dependable classic. But you still need to get an Arduino involved. There are all sorts of tricks with ISD chips or recordable greeting cards, but they never sound any good. So after a lot of engineering and tinkering, we've come out with the Adafruit Sound Board, the fastest way to add audio effects to a project! We think this is the best soundboard for props and costumes!\u003c\/p\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cp\u003eThe Sound Board has a lot of amazing features that make it the easiest thing ever:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Arduino or other microcontroller is required! \u003c\/strong\u003eIt is completely stand-alone and just needs a 3 to 5.5VDC battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall\u003c\/strong\u003e - only 1.9\" x 0.85\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt in storage\u003c\/strong\u003e - yep! you don't even need an SD card, there's 2MB of storage on the board itself. Good for a few minutes of compressed stereo, and maybe half a minute of uncompressed stereo. Double that if you go with mono instead of stereo. \u003cstrong\u003eIf you need more space we have a 16MB version here\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Mass Storage USB\u003c\/strong\u003e - Plug any micro USB cable into the Sound Board and your Windows computer, and you can drag and drop your files right on as if it were a USB key\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressed or Uncompressed audio\u003c\/strong\u003e - Go with compressed Ogg Vorbis files for longer audio files, or uncompressed WAV files\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality Sound\u003c\/strong\u003e - Do you want 44.1KHz 16-bit stereo? Not a problem! The decoding hardware can handle any bit\/sample rate and mono or stereo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11 Triggers\u003c\/strong\u003e - Connect up to 11 buttons or switches, each one can trigger audio files to play\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo line out\u003c\/strong\u003e - Headphones, powered speakers or even wire up one of our amplifiers to make loud sounds. We also have a version with a built-in stereo speaker amplifier\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive different trigger effects\u003c\/strong\u003e - by changing the name of the files, you can create five different types of triggers which will cover a large range of projects \u003cem\u003ewithout\u003c\/em\u003e any programming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cp\u003eWhat do we mean by trigger effects? Well, depending on your project you may need to have audio play in different ways. We thought of the five most common needs and built it into the Sound Board so you just rename the file to get the effect you want. See the product tutorial for more details\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasic Trigger\u003c\/strong\u003e - name the file Tnn.WAV or Tnn.OGG to have the audio file play when the matching trigger pin nn is connected to ground momentarily\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHold Looping Trigger\u003c\/strong\u003e - name the file TnnHOLDL.WAV or .OGG to have the audio play only when the trigger pin is held low, it will loop until the pin is released\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatching Loop Trigger\u003c\/strong\u003e - name the file TnnLATCH.WAV or .OGG to have the audio start playing when the button is pressed momentarily, and repeat until the button is pressed again\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlay Next Trigger\u003c\/strong\u003e - have up to 10 files play one after the other by naming them TnnNEXT0.WAV through TnnNEXT9.OGG. Will start with #0 and each one on every momentary button press until it gets through all of them, then go back to #0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlay Random Trigger\u003c\/strong\u003e - just like the Play Next trigger, but will play up to 10 files in random order (TnnRAND0.OGG thru TnnRAND9.OGG) every time the button is pressed momentarily\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cp\u003eThe soundboard is designed to be simple: it does not have polyphonic ability, and can't play MP3s (MP3 is patented and costs $ to license, so this board uses the similar but not-patented OGG format, there's tons of free converters that will turn an MP3 into OGG), isn't reprogrammable or scriptable, and you can't have any other kind of trigger type. However, there's a good chance the project you want to make will work great.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cp\u003eWe designed this board specifically for people who wanted to make props, costumes, toys, and other small portable projects. Check out the tutorial for all the powering options, you can power from 3-5VDC so a 3x AAA battery pack or a LiPoly battery will work well. You can even use our LiPoly backpack to fit on top of an all-in-one rechargeable effects board.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eRevision History\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAs of February 12th, 2025\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e– we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e22mm x 48mm x 6mm \/ 0.9\" x 1.9\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eWeight: 4.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930778759257,"sku":"ntj1789672942852","price":18.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adafruit-audio-fx-sound-board---wavogg-trigger-with-2mb-flash_1.jpg?v=1789672948"},{"product_id":"adafruit-proto-shield-for-arduino-unassembled-kit-stackable-version-r3","title":"Adafruit Proto Shield for Arduino Unassembled Kit - Stackable (Version R3)","description":"\u003cp\u003eThis prototyping shield is the best out there (well, we think so, at least), and now is even better with \u003cstrong\u003eVersion R3\u003c\/strong\u003e - updated for the most compatibility with just about all the Arduinos!\u003c\/p\u003e\n\u003cp\u003eIt works with UNO, Mega, Leonardo, NG, Diecimila, Duemilanove, and compatible Arduinos. Yun's and Arduino Ethernets have a chunky Ethernet jack that gets in the way of stacking, you can use the stacking headers included and it will work, just doesn't sit nice and flat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComes as a kit of parts \u003c\/strong\u003eso you can choose how you want to configure your shield. However, it's very easy to assemble even for beginning solderers. More information \u0026amp; instructions are available here.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eArduino and breadboards are not included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/OPvmO9w_2hc?si=mlEV9ORIOpruTabk\u0026amp;start=590\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 0.1\"x0.1\" prototyping grid with big pads\u003c\/li\u003e\n\u003cli\u003eComes with Stacking headers and plain headers, choose whichever you want when soldering together\u003c\/li\u003e\n\u003cli\u003eAn IC pattern for adding DIP ICs up to 20 pins\u003c\/li\u003e\n\u003cli\u003ePower rails down the middle and sides\u003c\/li\u003e\n\u003cli\u003eA reset button and an extra general-use button\u003c\/li\u003e\n\u003cli\u003eTwo 3mm general-use LEDs, red and green, as well as 2 matching resistors\u003c\/li\u003e\n\u003cli\u003eA pass-thru ICSP stacking header so you can stack any kind of shield on top, and\/or use an AVR programmer\u003c\/li\u003e\n\u003cli\u003eA surface-mount chip area for up to 14 SOIC-size parts\u003c\/li\u003e\n\u003cli\u003eCompatible with tiny breadboards\u003c\/li\u003e\n\u003cli\u003eEvery pin is brought out!\u003c\/li\u003e\n\u003cli\u003eGold-plated pads\u003c\/li\u003e\n\u003cli\u003e2 x 0.1uF capacitors on either side for extra power stability\u003c\/li\u003e\n\u003cli\u003eFits regular Arduino headers\u003c\/li\u003e\n\u003cli\u003eDimensions (assembled): 69mm x 53mm x 13mm (2.7in x 2.1in x 0.5in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits regular Arduino headers\u003c\/li\u003e\n\u003cli\u003eDimensions (assembled): 69mm x 53mm x 13mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930780004441,"sku":"lbo1789672988171","price":9.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/adafruit-proto-shield-for-arduino-unassembled-kit---stackable-version-r3_1.jpg?v=1789672992"},{"product_id":"verter-5v-usb-buck-boost-500ma-from-3v-5v-1000ma-from-5v-12v","title":"VERTER 5V USB Buck-Boost - 500mA from 3V-5V \/ 1000ma from 5V-12V","description":"\u003cp\u003eConvert just about any battery pack to 5V with VERTER - our fresh new Buck-Boost power converter. VERTER can take battery voltages from 3-12VDC and output a nice 5V DC, which makes it a perfect universal power supply for your portable project! Where Verter really shines is when you have a battery or power range that can fluctuate a lot, or you don't know what you'll end up using.\u003c\/p\u003e\n\u003cp\u003eIt operates smoothly over the 3-12V range, moving from a boost converter (3-5V in) to a buck converter (5-12V in) on the fly. \u003cstrong\u003ePlease note! This chip can do both, but it really works better as a buck converter than a boost\u003c\/strong\u003e. If you need a full 500mA out, it will struggle as it gets down to 3V and the output will sag to about 4.8V (which is still within standard USB power specs). If you only need something to boost a voltage up to 5V and you want it to be really good at it, check out our PowerBoost series, which excels at that.\u003c\/p\u003e\n\u003cp\u003eLike our popular 5V 1A USB wall adapter, we tweaked the output to be 5.2V instead of a straight-up 5.0V so that there's a little bit of 'headroom' long cables, high draw, the addition of a diode on the output if you wish, etc. The 5.2V is safe for all 5V-powered electronics like Arduino, Raspberry Pi, or Beagle Bone while preventing icky brown-outs during high current draw because of USB cable resistance.\u003c\/p\u003e\n\u003cp\u003eThe VERTER has at the heart a TPS63060 boost converter from TI. This buck-boost converter chip can handle a wide range of voltages (3-12V) and has some really nice extras such as power good output, a 2A internal switch, synchronous conversion, excellent efficiency, and 2.2MHz high-frequency operation. Check out these specs!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSynchronous operation means you can disconnect the output completely by connecting the ENable pin to ground. This will completely turn off the output\u003c\/li\u003e\n\u003cli\u003e2A internal switch means you can get out 500mA from as low as 3V, and at least 1000mA from inputs as high 12V\u003c\/li\u003e\n\u003cli\u003eOn-board 500mA charge-rate 'Apple\/iOS' data resistors. Solder in the included USB connector and you can plug in any iPhone or iPod for a 500mA charge rate. Not suggested for iPad (which really needs a 1A charge rate).\u003c\/li\u003e\n\u003cli\u003eFull breakout for battery in, control pins and power out\u003c\/li\u003e\n\u003cli\u003e90%+ operating efficiency in most cases (see datasheet for efficiency graphs), and low quiescent current: 5mA when enabled and power LED is on, 20uA when disabled (power and low batt LED are off)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGreat for powering your robot, Arduino project, or single-board-computer such as Raspberry Pi or BeagleBone from a wide variety of inputs. We especially like it for use with 4 x AA batteries, which can range from 7V for fresh alkalines down to 4V for nearly-dead rechargeables. If you're only going to be using voltages higher than 6V, we recommend our UBEC step-down. If you're only going to be using voltages under 5V, check out the PowerBoost 500 which has a much better boosting capability\u003c\/p\u003e\n\u003cp\u003eEach order comes with one fully assembled and tested PCB, 2 2-pin terminal blocks, and a loose USB A jack. If you are powering your project from USB, solder the USB A jack in (a 3-minute soldering task). If you would like to use a terminal block, pick up a 3.5mm 2-pin block here and solder to the output spot where the USB jack would go. The terminal block goes on the input side, so you can easily connect and disconnect a battery pack. Or don't solder anything in for a more compact power pack.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The terminal block included with your product may be blue or black.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of February 12th, 2025\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– We've updated this PCB with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAdafruit Pinguin\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003ePCB Dimensions: 19mm x 32mm x 5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEagleCAD PCB Files on GitHub\u003c\/li\u003e\n\u003cli\u003eFritzing parts in Adafruit Fritzing library\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930780594265,"sku":"sdn1789673009052","price":8.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/verter-5v-usb-buck-boost---500ma-from-3v-5v-1000ma-from-5v-12v_1.jpg?v=1789673013"},{"product_id":"universal-qi-wireless-charging-transmitter","title":"Universal Qi Wireless Charging Transmitter","description":"\u003cp\u003e\u003cstrong\u003eThis Qi Wireless Charging Transmitter adds wireless charging to electronics projects, delivering up to 5W of power to a standard Qi receiver over a 2–8mm charging distance.\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eIf you have a modern smart phone you may have noticed that it comes with built in wireless charging capability called 'Qi charging.'\u003c\/p\u003e\n\u003cp\u003eQi is a trademark name for a thin and smart inductive charging system. Many large gadget companies have standardized on Qi, which means it's easy to find a charging dish and we thought it might be cool if your Arduino project can recharge itself wirelessly.\u003c\/p\u003e\n\u003cp\u003eWe've added a ton of Qi receivers but, until now, we haven't had a charging base.  No longer!\u003c\/p\u003e\n\u003cp\u003eThis is a super simple Qi transmitter.  It will \u003cstrong\u003ework with any standard Qi charger receivers.\u003c\/strong\u003e You just connect the board to a \u003cstrong\u003e5V \u003c\/strong\u003epower supply - either through a \u003cstrong\u003emicro USB port\u003c\/strong\u003e - then put your device w\/ Qi receive onto the base. If you want to 'share' the micro-USB power connection, you can also connect direct to the \u003cstrong\u003eUSB-A port\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eMaximum output is around \u003cstrong\u003e5W\u003c\/strong\u003e which is good for most smart phones, basically \u003cstrong\u003e1000mA charge at 5V \u003c\/strong\u003eon the other side of the wireless connection.  It has a charging distance of \u003cstrong\u003e2-8mm\u003c\/strong\u003e, works with all our Qi charge receivers. You can only use one receiver per transmitter so if you want to charge two Qi devices at once, you'll need 2 transmitters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: \u003c\/strong\u003ePCB may come in blue or green, the PCB may also look different, and the ferrous back-plate of the coil may be round or square. (We're stocking these for folks making DIY Qi chargers, the modules we get all function the same but may not look physically the same).\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/UZ8GDS36BN4?si=Nyi-AIcEiME4Hl4T\u0026amp;start=1309\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 5V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Current: 2A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum output power of 5W\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Frequency: 100-200kHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCharging Distance: 2-8mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCharging Plate Dimensions: 53mm x 53mm x 4mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions w\/ Components: 55mm x 37mm x 6mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 47g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eQi wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Universal Qi Wireless Charging Transmitter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930781118553,"sku":"xcp1789673024329","price":25.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/universal-qi-wireless-charging-transmitter_1.jpg?v=1789673028"},{"product_id":"extruded-aluminum-enclosure-box-94mm-x-83mm-x-30mm","title":"Extruded Aluminum Enclosure Box - 94mm x 83mm x 30mm","description":"\u003cp\u003eIf you have a circuit board or a project you want enclosed, but need something extra durable, this extruded box is absolutely perfect. It's made from solid anodized aluminum so it's still lightweight while being durable, it's also easy to machine or drill. The end-plates come off and you could cut out a custom end plate from another material if you like.\u003c\/p\u003e\u003cp\u003eThe inside has circuit board slots so if you have a custom PCB, it can slot in without screws and won't rattle around too much. We thought this would be perfect for something like a DIY audio amplifier or maybe even a measurement tool that does best with RF shielding.\u003c\/p\u003e\u003cp\u003eThese also come in a nice dark anodized-black aluminum. Each comes with a box, eight screws, and two panels for the sides. Screws are 6mm length, M2.5 size, with a .45mm pitch if you lose one or need more. \u003c\/p\u003e\u003cp\u003eThis is a \u003cstrong\u003e94mm x 83mm x 30mm box\u003c\/strong\u003e. We also carry a 100mm x 67mm version.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003eDimensions: 94mm x 83mm x 30mm \/ 3.7\" x 3.3\" x 1.1\"\u003c\/li\u003e\n\u003cli\u003eInterior dimensions: 78mm x 25mm \/ 3.1\" x 1.0\"\u003c\/li\u003e\n\u003cli\u003eWeight: 125g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e \u003cli\u003e\nDiagram \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930781544537,"sku":"vqy1789673037621","price":6.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/extruded-aluminum-enclosure-box---94mm-x-83mm-x-30mm_1.jpg?v=1789673042"},{"product_id":"extruded-aluminum-enclosure-box-100mm-x-67mm-x-26mm","title":"Extruded Aluminum Enclosure Box - 100mm x 67mm x 26mm","description":"\u003cp\u003ef you have a circuit board or a project you want enclosed, but need something extra durable, this extruded box is absolutely perfect. It's made from solid anodized aluminum so it's still lightweight while being durable, it's also easy to machine or drill. The end-plates come off and you could cut out a custom end plate from another material if you like.\u003cbr\u003e\u003cbr\u003eThe inside has circuit board slots so if you have a custom PCB, it can slot in without screws and won't rattle around too much. We thought this would be perfect for something like a DIY audio amplifier or maybe even a measurement tool that does best with RF shielding.\u003cbr\u003e\u003cbr\u003eThese also come in a nice dark anodized-black aluminum. Each comes with a box, eight screws, and two panels for the sides. Screws are 6mm length, M2.5 size, with a .45mm pitch if you lose one or need more.\u003c\/p\u003e\n\u003cp\u003eThis is a \u003cstrong\u003e100mm x 67mm x 26mm box\u003c\/strong\u003e. We also carry a 90mm x 82mm version. We show it with a Raspberry Pi for scale (Pi is not included, of course)\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 100mm x 67mm x 26mm \/ 3.9\" x 2.6\" x 1.0\"\u003c\/li\u003e\n\u003cli\u003eInterior dimensions: 61mm x 24mm \/ 2.4\" x 0.9\"\u003c\/li\u003e\n\u003cli\u003eWeight: 87g\u003c\/li\u003e\n\u003cli\u003eDiagram\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930782036057,"sku":"pnx1789673062589","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/extruded-aluminum-enclosure-box---100mm-x-67mm-x-26mm_1.jpg?v=1789673066"},{"product_id":"micro-servo-high-powered-high-torque-metal-gear","title":"Micro Servo - High Powered, High Torque Metal Gear","description":"\u003cp\u003e\u003cstrong\u003eThis High Torque Metal Gear Micro Servo delivers strong torque from a compact servo, with metal gears and approximately 180° of rotation for adding controlled movement where space is limited.\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eAdd even more power to your robot with this Adafruit \u003cstrong\u003eMetal-Geared Servo\u003c\/strong\u003e. The tiny little servo can rotate approximately \u003cstrong\u003e180 degrees \u003c\/strong\u003e(~90 in each direction), and works just like the standard kinds you're used to but smaller.\u003c\/p\u003e\n\u003cp\u003eYou can use any servo code, hardware or library to control these servos. \u003cstrong\u003eGood for beginners\u003c\/strong\u003e who want to make stuff move without building a motor controller with feedback \u0026amp; gear box, especially since it will fit in small places.\u003c\/p\u003e\n\u003cp\u003eDespite its size, this micro-servo is as strong as many 'standard' size servos! Works great with the \u003cstrong\u003eMotor Shield\u003c\/strong\u003e for Arduino, our \u003cstrong\u003e16-channel Servo Driver\u003c\/strong\u003e, or by just wiring up with the Servo library. \u003cstrong\u003eComes with a few horns and hardware\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis micro servo packs a big punch for its little size.  it's just a little bit bigger than our High Torque Metal Gear Micro Servo but runs with almost double the stall torque.\u003c\/p\u003e\n\u003cp\u003eTo control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch).\u003c\/p\u003e\n\u003cp\u003e Position \"0\" (\u003cstrong\u003e1.5ms pulse\u003c\/strong\u003e) is middle, \"90\" (\u003cstrong\u003e~2ms pulse\u003c\/strong\u003e) is all the way to the right, \"-90\" (\u003cstrong\u003e~1ms pulse\u003c\/strong\u003e) is all the way to the left. Note that, unlike most servos you may be familiar with, this one does not have mechanical stops! Also, this servo requires \u003cstrong\u003e5V \u003c\/strong\u003esignals, check that your driver\/microcontroller is supplying 5V logic as well as 5V power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The default servo pulse widths (usually 1ms to 2ms) may not give you a full 180 degrees of motion. In that case, check if you can set your servo controller to custom pulse lengths and try 0.75ms to 2.25ms. You can try shorter\/longer pulses but be aware that if you go too far you could break your servo!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/evUJcpuhmD8?si=fNaQwmgugSKbsD8B\u0026amp;start=95\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStall Torque (4.8v): 3.1kg\/cm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStall Torque (6.0v): 3.5kg\/cm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Speed (4.8v): 0.13sec\/60°\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Speed (6.0v): 0.08sec\/60°\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 5.0~6.6v\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e36mm x 12mm x 31mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWire Length: 257mm \u003c\/li\u003e\n\u003cli\u003eWeight: 14g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpline Count: 20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Micro Servo - High Powered, High Torque Metal Gear\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":44930784034905,"sku":"rfz1789673140733","price":10.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/5289\/5833\/files\/micro-servo---high-powered-high-torque-metal-gear_1.jpg?v=1789673145"}],"url":"https:\/\/gymflexfit.shop\/collections\/adafruit-products.oembed","provider":"My Store","version":"1.0","type":"link"}